diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 57aa53d..9a66e68 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -114,12 +114,13 @@
 static int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
 static int e1000_phy_reset(struct e1000_hw *hw);
 static int e1000_detect_gig_phy(struct e1000_hw *hw);
-static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
 static void e1000_set_media_type(struct e1000_hw *hw);
 
 static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
 static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
 
+#ifndef CONFIG_E1000_NO_NVM
+static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
 static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset,
 		uint16_t words,
 		uint16_t *data);
@@ -885,6 +886,7 @@
 
 	return -E1000_ERR_EEPROM;
 }
+#endif /* CONFIG_E1000_NO_NVM */
 
 /*****************************************************************************
  * Set PHY to class A mode
@@ -897,6 +899,7 @@
 static int32_t
 e1000_set_phy_mode(struct e1000_hw *hw)
 {
+#ifndef CONFIG_E1000_NO_NVM
 	int32_t ret_val;
 	uint16_t eeprom_data;
 
@@ -923,10 +926,11 @@
 			hw->phy_reset_disable = false;
 		}
 	}
-
+#endif
 	return E1000_SUCCESS;
 }
 
+#ifndef CONFIG_E1000_NO_NVM
 /***************************************************************************
  *
  * Obtaining software semaphore bit (SMBI) before resetting PHY.
@@ -965,6 +969,7 @@
 
 	return E1000_SUCCESS;
 }
+#endif
 
 /***************************************************************************
  * This function clears HW semaphore bits.
@@ -977,6 +982,7 @@
 static void
 e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
 {
+#ifndef CONFIG_E1000_NO_NVM
 	 uint32_t swsm;
 
 	DEBUGFUNC();
@@ -991,6 +997,7 @@
 	} else
 		swsm &= ~(E1000_SWSM_SWESMBI);
 	E1000_WRITE_REG(hw, SWSM, swsm);
+#endif
 }
 
 /***************************************************************************
@@ -1007,6 +1014,7 @@
 static int32_t
 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
 {
+#ifndef CONFIG_E1000_NO_NVM
 	int32_t timeout;
 	uint32_t swsm;
 
@@ -1043,7 +1051,7 @@
 				"SWESMBI bit is set.\n");
 		return -E1000_ERR_EEPROM;
 	}
-
+#endif
 	return E1000_SUCCESS;
 }
 
@@ -1097,6 +1105,7 @@
 	}
 }
 
+#ifndef CONFIG_E1000_NO_NVM
 /******************************************************************************
  * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
  * second function of dual function devices
@@ -1136,6 +1145,7 @@
 #endif
 	return 0;
 }
+#endif
 
 /******************************************************************************
  * Initializes receive address filters.
@@ -1764,9 +1774,11 @@
 e1000_setup_link(struct eth_device *nic)
 {
 	struct e1000_hw *hw = nic->priv;
-	uint32_t ctrl_ext;
 	int32_t ret_val;
+#ifndef CONFIG_E1000_NO_NVM
+	uint32_t ctrl_ext;
 	uint16_t eeprom_data;
+#endif
 
 	DEBUGFUNC();
 
@@ -1775,6 +1787,7 @@
 	if (e1000_check_phy_reset_block(hw))
 		return E1000_SUCCESS;
 
+#ifndef CONFIG_E1000_NO_NVM
 	/* Read and store word 0x0F of the EEPROM. This word contains bits
 	 * that determine the hardware's default PAUSE (flow control) mode,
 	 * a bit that determines whether the HW defaults to enabling or
@@ -1788,7 +1801,7 @@
 		DEBUGOUT("EEPROM Read Error\n");
 		return -E1000_ERR_EEPROM;
 	}
-
+#endif
 	if (hw->fc == e1000_fc_default) {
 		switch (hw->mac_type) {
 		case e1000_ich8lan:
@@ -1797,6 +1810,7 @@
 			hw->fc = e1000_fc_full;
 			break;
 		default:
+#ifndef CONFIG_E1000_NO_NVM
 			ret_val = e1000_read_eeprom(hw,
 				EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
 			if (ret_val) {
@@ -1809,6 +1823,7 @@
 				    EEPROM_WORD0F_ASM_DIR)
 				hw->fc = e1000_fc_tx_pause;
 			else
+#endif
 				hw->fc = e1000_fc_full;
 			break;
 		}
@@ -1828,6 +1843,7 @@
 
 	DEBUGOUT("After fix-ups FlowControl is now = %x\n", hw->fc);
 
+#ifndef CONFIG_E1000_NO_NVM
 	/* Take the 4 bits from EEPROM word 0x0F that determine the initial
 	 * polarity value for the SW controlled pins, and setup the
 	 * Extended Device Control reg with that info.
@@ -1840,6 +1856,7 @@
 			    SWDPIO__EXT_SHIFT);
 		E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
 	}
+#endif
 
 	/* Call the necessary subroutine to configure the link. */
 	ret_val = (hw->media_type == e1000_media_type_fiber) ?
@@ -5196,6 +5213,7 @@
 		e1000_reset_hw(hw);
 		list_add_tail(&hw->list_node, &e1000_hw_list);
 
+#ifndef CONFIG_E1000_NO_NVM
 		/* Validate the EEPROM and get chipset information */
 #if !defined(CONFIG_MVBC_1G)
 		if (e1000_init_eeprom_params(hw)) {
@@ -5206,11 +5224,17 @@
 			continue;
 #endif
 		e1000_read_mac_addr(nic);
+#endif
 		e1000_get_bus_type(hw);
 
+#ifndef CONFIG_E1000_NO_NVM
 		printf("e1000: %02x:%02x:%02x:%02x:%02x:%02x\n       ",
 		       nic->enetaddr[0], nic->enetaddr[1], nic->enetaddr[2],
 		       nic->enetaddr[3], nic->enetaddr[4], nic->enetaddr[5]);
+#else
+		memset(nic->enetaddr, 0, 6);
+		printf("e1000: no NVM\n");
+#endif
 
 		/* Set up the function pointers and register the device */
 		nic->init = e1000_init;
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index 25884f5..ff87af2 100644
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -63,11 +63,14 @@
 
 /* Internal E1000 helper functions */
 struct e1000_hw *e1000_find_card(unsigned int cardnum);
+
+#ifndef CONFIG_E1000_NO_NVM
 int32_t e1000_acquire_eeprom(struct e1000_hw *hw);
 void e1000_standby_eeprom(struct e1000_hw *hw);
 void e1000_release_eeprom(struct e1000_hw *hw);
 void e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
 void e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
+#endif
 
 #ifdef CONFIG_E1000_SPI
 int do_e1000_spi(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
@@ -1019,6 +1022,7 @@
 	uint64_t tsctfc;
 };
 
+#ifndef CONFIG_E1000_NO_NVM
 struct e1000_eeprom_info {
 e1000_eeprom_type type;
 	uint16_t word_size;
@@ -1029,6 +1033,7 @@
 	bool use_eerd;
 	bool use_eewr;
 };
+#endif
 
 typedef enum {
     e1000_smart_speed_default = 0,
@@ -1081,10 +1086,14 @@
 	uint32_t io_base;
 #endif
 	uint32_t		asf_firmware_present;
+#ifndef CONFIG_E1000_NO_NVM
 	uint32_t		eeprom_semaphore_present;
+#endif
 	uint32_t		swfw_sync_present;
 	uint32_t		swfwhw_semaphore_present;
+#ifndef CONFIG_E1000_NO_NVM
 	struct e1000_eeprom_info eeprom;
+#endif
 	e1000_ms_type		master_slave;
 	e1000_ms_type		original_master_slave;
 	e1000_ffe_config	ffe_config_state;